category filters
Oil & Gas Products

Wireless / IoT

Water Management

Industrial Controls

  • We are here to help.

    Our dedicated staff in Boerne, Texas is available to answer questions about Electrolab products and services.

  • For more info, call:

    1 888 301-2400

    Monday-Friday: 7am-4:30pm Central Time

  • Email Us
  • Find a Distributor
  • Support

D99 Thermocouple Node

D99 Thermocouple Node

Categories: Nodes

The Electrolab D99 Thermocouple Node is a wireless industrial I/O device with two selectable discrete inputs and up to three configurable thermocouple inputs (the default is J type). One thermistor input used for integrated cold junction compensation (CJC). Frequency Hopping Spread Spectrum technology and Time Division Multiple Access control ensure reliable data delivery. Transceivers provide bidirectional communication between the Gateway and Node, including fully acknowledged data transmission. Lost RF links are detected and relevant outputs set to user-defined conditions.


Request for Quote

(Please include all of the specifications from the Configuration Options below on your RFQ)

The Electrolab D99 Thermocouple Node (SKU: ELD99T4D0) is set to default to high resolution. Temperature values are stored to the nearest tenth (0.1) of a degree. To measure temperatures above 1600 degrees F or 1600 degrees C, you must configure the node to use low resolution mode. You can easily configure the node for either Fahrenheit or Celsius measurement, using switches inside the node housing.

The node is powered with one lithium battery integrated into the intrinsically safe housing. The D99 housing is certified for use in Class I, Div. 1, Groups A, B, C, and D. Class II, Div. 1, Groups E, F, G; Class III, Zone 0 and 20 when properly installed in accordance with the National Electrical Code and applicable local codes and regulations.